6110F Fire System

To see if dampers really have the vent area they claim to have, they need to be tested and this model does that really well. It not only has lots of flow but can create 100s of Pa to see at what point the Pressure Relief Vents actually open. Then it will test the vent path to ensure the peak pressure evaluation complies with the standard. Sufficient power also to test larger enclosures and an ideal place to start since it can be easily upgraded to the full feature 3212F when you want to measure the lower leak which often is the only way to pass many enclosures. Test for hold times in flooded volumes up to 51,000 cu ft (1000 m3) for Inert agents and 70,000 cu ft (2000 m3) for halocarbon chemical agents. Testing pressure relief vents will require more power. This system will test the venting for a volume up to a maximum of 12,000 cu ft (330 m3) for Inert agents although vents up to 8 sq ft (0.8 m2) can be measured individually. Request literature on all of Retrotec systems to determine the size of enclosures that can be tested with each system.

Why Retrotec for Enclosure Integrity?

All Retrotec systems include tech support from Retrotec who originated the idea of Enclosure Integrity testing in 1984. They promoted it within NFPA and in 1986 wrote the first Enclosure Integrity standard. Retrotec has been the lead researcher for enclosure testing ever since. Every major clean agent system manufacturer worldwide relies on Retrotec’s expertise for both hold time and peak pressure predictions.

Includes Items
1 x DM32 WiFi Digital Gauge Package

  • DM32 WiFi Dual Channel Color Touchscreen Manometer
  • USB Cable, 6′ (1.8 m)
  • Cat5 Cable, 7′ (2 m) Blue
  • DM32 USB Charging Module (120V/60Hz, 240V/50Hz, or 110V/50Hz)
  • DM32 Software Suite (Virtual Gauge, DM32 Configurator, Data Logger, and DM32 USB driver)
  • Gauge Case
  • DM32 Magnetic Clip
  • ISO17025 calibration of DM32
  • Gauge Calibration Verification Report

1 x 6000 Series Fan Set

  • Each fan set contains: 6000 Series Calibrated Fan
  • High Power Drive for 6000 Series Fan (120V/60Hz, 240V/50Hz, or 110V/50Hz)
  • Range Ring A for 5000/6000 Series Fan
  • B8 Plate for 5000/6000 Series Fan
  • 8 x 4″ Blank Plugs
  • Power Cord
  • 2 x Fan Cover
  • System Calibration Verification Report

1 x Large Cloth Door Panel (or Hard Panel if chosen) & Frame – Single Fan

  • Large 50″ Aluminum Frame
  • Large #5 Crossbar
  • 3 x Fan Crossbar Strap for Aluminum Frame
  • Single Fan Cloth for Large 50″ Aluminum Frame
  • Large Roll Up Cloth Case
  • 2 x Large #6 Crossbar
  • 1 x Case for System Accessories
  • 1 x Fan Case
  • 3 x Roll of Grill Masks, 12″ x 216′ (30.5 cm x 65.8 m) with 12″ (30.5 cm) perforations
  • 1 x Blower Door Tubing Kit
  • 1 x Umbilical for 1000/5000/6000 Series Fan, 7 ft (2 m)